Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
albert wrote:
i would sand it first,
cleen it a little and then prime
for the gelcoat i would do a clear white (whaler only)
but from 1995 to 2005
those are one of the best
Clean first, sand and then prime.
John Fyke
Re-Fit or Reef It
1979 15' Sport with Super Sport conversion and 70hp mercury.
Well, didn't check this post as often as I should have. Just prepped (with Interlux Fiberglass Prep) and scuffed (w/120 grit sandpaper), and three cotas of Petit Hydracoat. No epoxy barrier. Wish I had read further first, but will see how it goes. Boat will be sitting for long periods on a mooring in Maine.
I'll repost in the fall with my results.
How long does it take to get blistering, and what does one do about it.