1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1990 13' Super Sport Interior Pictures
holdenon2003	#1  Posted on 05/14/10 - 12:55 PM
Member Posts: 15 Comments: 0 Joined: 09/28/07	I am wondering if anyone has some close range pictures of the wood pieces in a 13' Super Sport. I took my boat apart to fix a badly damaged hull and bought new wooden parts but I am having a hard time trying to remember how to put everything back together. The set I bought came to me with no holes and just slabs of wood so I am trying to go by memory and the cob webs are a bit thick. I tried the download section but find the pictures to be too small and detailed to understand. Any help would be greatly appreciated. Thank you!
John Fyke	#2  Posted on 05/14/10 - 12:58 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	Can you lay the old pieces on top the new and drill the holes from there? John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
Joe Kriz	#3  Posted on 05/14/10 - 1:09 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	holdenon, The drawing is in .pdf format You can enlarge it to any size you want by hitting the + sign in your pdf viewer. It is not too small.
kamie	#4  Posted on 05/14/10 - 4:40 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	holdenon, Did the parts you purchase come with the cleats attached? If they did, the cleats give you all the angles you need. If your looking for photo's check the personal pages. If you don't see anything that helps, let me know and I will dig thru the photo's i have.
gilgotes	#5  Posted on 05/14/10 - 5:00 PM
Member Personal Page Posts: 45 Comments: 5 Joined: 10/28/09	Holdenon, You can see the final assembly of the super sport console at the WC sponsor, Specialty Marine at: http://www.specialtymarine.com/Boston-Whaler-Mahogany-Interiors-amp-Parts/BOSTON-WHALER-MAHOGANY-SUPER-SPORT-CONSOLE-11-13-15-p137.html or find some members photos. There are many. Mike 1976 11ft. Sport, 40hp Evinrude
holdenon2003	#6  Posted on 05/17/10 - 3:47 AM
Member Posts: 15 Comments: 0 Joined: 09/28/07	Thank you for your suggestions, I will give them a shot. The problem is I sent my interior to one of our vendors. I should of documented it but I was told it would be sent back with the new set. The new set came in but the old set never arrived. Whe I called to ask about my oringal set I was told it would not be sent back...??? I am happy with the quality of the wood and the finishing. I did get a beautiful console but the side pieces and some of the others are just new slabs of wood with no holes for screws. I am having a tough time trying to figure out the angles that the cleats should be for the seat back and storage box. Also I think I am missing some pieces and am trying to get an inventory of them. When I initially spoke with the vendor everything seemed fine but when I asked for my original parts back as agreed, I even forwarded them the original email dialogue where it was stated that they would be sent back I was told they could not be sent back...so that leaves me where I am today - very frustrated. Thank you all for your help and assistance.