1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Baystar install on oldie..
nauset-heir	#1  Posted on 05/10/10 - 2:07 PM
Member Posts: 46 Comments: 0 Joined: 07/15/09	I'm finally ready to put my 68 Nauset together and just drilled the holes for the Baystar helm. It fits perfectly but it seems to me that there should be a rubber gasket on the flange to seal it. There wasn't one in the kit so will have to make one...has anyone installed one of these on a Mahogany console?...was there a moisture problem around the base? Chris
number9	#2  Posted on 05/10/10 - 4:47 PM
Member Posts: 210 Comments: 1 Joined: 03/13/08	Looked at their manual, are you suggesting the gasket between the back mount plate and the dash? May be a good idea to protect the wood. Bill...On the Ogeechee 1984 Outrage 18...Yamaha T50...that's right, 50hp