1967 bow hatch anchor cover
|
paint79 |
Posted on 04/25/10 - 9:29 AM
|
Member
Posts: 18
Comments:
0
Joined: 04/05/07
|
hi, where can i buy a factory wood bow hatch anchor cover for my 1967 boston whaler nauset? looking to restore. also have questions about spider cracks on my hull, can they be filled? are they just cosemetic? i compounded and waxed the hull yesterday, they are sealed but still there, should i be concerned?
thanks again
jeff sanderson
1967 boston whaler nauset
1991 johnson SPL88
Edited by paint79 on 04/25/10 - 10:18 AM |
|
|
|
HarleyFXDL |
Posted on 04/25/10 - 10:29 AM
|
Member
Personal Page
Project Albums
Posts: 917
Comments:
30
Joined: 07/24/07
|
You will need to buy either teak or mahogany and make it yourself. If you are not too handy with wood, I would recommend looking at some of the sponsors who work with wood.
Kevin
1988 11' Super Sport, 1987 Johnson 15hp.
If you think education is expensive, try ignorance
"Vegetarian - old Indian word for bad fisherman." |
|
|
|
paint79 |
Posted on 04/25/10 - 11:06 AM
|
Member
Posts: 18
Comments:
0
Joined: 04/05/07
|
ok thanks, so where can i find a template? i have my own little wood shop, is the wood able to be bought at my local lumber yard or on ebay?
thank you,
jeff sanderson
1967 boston whaler nauset
|
|
|
|
HarleyFXDL |
Posted on 04/25/10 - 12:19 PM
|
Member
Personal Page
Project Albums
Posts: 917
Comments:
30
Joined: 07/24/07
|
I had to find a special wood dealer for teak and mahogany. It was not something your local lumber yard stocks. As far as a template, take the measurements from the exposed bow hatch.
Kevin
1988 11' Super Sport, 1987 Johnson 15hp.
If you think education is expensive, try ignorance
"Vegetarian - old Indian word for bad fisherman." |
|
|
|
Phil T |
Posted on 04/25/10 - 1:46 PM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 6991
Comments:
6
Joined: 03/26/05
|
Mike from Nautical Lumber can fabricate one that is top quality. He is who Kevin is referring to.
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|
|
paint79 |
Posted on 04/25/10 - 6:23 PM
|
Member
Posts: 18
Comments:
0
Joined: 04/05/07
|
OK GREAT, THANK YOU SO MUCH, HAVE A NICE NIGHT.
JEFF SANDERSON
HOPEDALE MASS
1967 BOSTON WHALER NAUSET
1991JOHNSON SPL88
|
|
|
|
Zamboni65 |
Posted on 04/25/10 - 6:34 PM
|
Member
Personal Page
Posts: 44
Comments:
0
Joined: 07/07/09
|
I have a question why do you need special wood like teak or mahogany? It is just a bow hatch.
|
|
|
|
paint79 |
Posted on 04/26/10 - 6:34 PM
|
Member
Posts: 18
Comments:
0
Joined: 04/05/07
|
restoration to factory specs
|
|
|
|
schoir22 |
Posted on 04/27/10 - 12:52 PM
|
Member
Posts: 28
Comments:
1
Joined: 09/26/08
|
I had one made by Nautical Lumber and it came out great. I had them recess and stainless ring pull rather than a hole to keep the water out. Very reasonably priced.
|
|
|