1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Dimension help, seat location
Zamboni65	#1  Posted on 04/18/10 - 3:11 PM
Member Personal Page Posts: 44 Comments: 0 Joined: 07/07/09	We have the boat totally stripped, primed and ready for finish paint next weekend. We know where the center console goes but I am looking for the dimension everyone uses between the console and the face of the helm seat. We have found a swing back storage seat.
Joe Kriz	#2  Posted on 04/18/10 - 3:30 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Is this an aftermarket "swing back storage seat" ? Or did you buy an original style "RPS" ? http://www.whalercentral.com/photogal...oto_id=775 Can we also assume that you are using the Montauk style console that you show in your personal page?
Zamboni65	#3  Posted on 04/18/10 - 3:53 PM
Member Personal Page Posts: 44 Comments: 0 Joined: 07/07/09	Joe Kriz wrote: Is this an aftermarket "swing back storage seat" ? [color=#cc0033]YES AFTER MARKET 15" DEEP[/color] Can we also assume that you are using the Montauk style console that you show in your personal page? [color=#cc0000]YES 1975 MONTAUK STYLE CONSOLE.[/color] Edited by Zamboni65 on 04/18/10 - 3:57 PM
Guts	#4  Posted on 04/18/10 - 10:02 PM
Member Personal Page Posts: 612 Comments: 8 Joined: 11/21/08	I sent you a email with pics. Guts/AKA/Kim
Zamboni65	#5  Posted on 04/19/10 - 3:21 AM
Member Personal Page Posts: 44 Comments: 0 Joined: 07/07/09	Thanks - 15" that is what we had roughly laid it out at.