Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Here is a good measured drawing for the console side. The drawing I have is simular but 16 inches tall, not 15 so you might want to measure your boat and confirm. The one I had was not an orignal version so that could account for the differences.
I haven't built any of it yet. The boat is upside down on the trailer waiting for warm weather so I can grind, patch and gelcoat the bottom. All the boat work is done outside since I don't have a nice garage to work in, which means right now, there is 3 feet of snow and 30 degree temps in my work space.
I am planning on mocking up my interior first out of MDF as I am going to make a dual console version of the Super Sport. My two consoles will each be about 20 inches wide which should leave about 14 inches for walking forward on the deck. It will also permit storage under the consoles using rubbermaid waterproof boxes. Important for PDF's and flares. I haven't decided if I will raise the entire interior one or two inches, just to make seating a bit more comfortable.
Once i finish, I will make drawings available to anyone that wants them.