Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I'm looking for someone who has the factory generator on their OMC outboard. I need the dimensions of the generator itself. I have the flywheel with the belt groove, now looking to install a charging system.
Check out the AOMCI site (Antique Outboard Motor Clu [url] http://www.aomci.org/[/url] They have a forum called Ask A Member, They will give you the info you are looking for on your motor.
Good news....I just purchased a restored 1962 Evinrude 40hp motor with charging system. I will send you pics and dimensions when the motor is delivered next week.
Hi, you've probbly done this but, look on e-bay under evinrude or johnson as there is the old 60's parts there. The bracket for the generator as well as the one for the starter. Also they used a voltage regulator in the system and in the early days they were mounted outside the engine in a metal box. Later on the regulator was put inside the engine cowl as the boxes would get flooded with water and the regulator would get toasted. We had a '66 40hp johnson and it had one on it. My dad had the front pan changed out and the regulator put inside after about 3 regulators later. As I recall the belt was more like a timeing belt with riges than a typical "v" belt. Oh yea the boat was a 13' sport '69
[url] http://www.aomci.org/[/url] They have a forum called Ask A Member, They will give you the info you are looking for on your motor.
