1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Floor access plate
gfrutig1	#1  Posted on 04/23/05 - 4:58 PM
Member Personal Page Posts: 1 Comments: 0 Joined: 04/02/05	Joe Kris, Just wanted to say thanks for the info from your post on where and what to get to replace my gas tank guage cover, it was right on. Thank you Gary
Joe Kriz	#2  Posted on 04/23/05 - 5:38 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Gary, It sounds like you are talking about the Beckson Deck Plates that are shown in the OEM section. Is that correct? http://whalercentral.com/photogallery...?photo=325 We are expanding our OEM parts photos and information as much as we can. We have many more parts photos and info to add but this does take time. Thanks
jbarrow4124	#3  Posted on 04/23/05 - 6:55 PM
Member Posts: 6 Comments: 0 Joined: 04/12/05	Joe, I also have an 18' Outrage. I'm having trouble finding the Beckson dimple deck plates in Khaki. Where can I find these? Thanks, Jack
seaduck	#4  Posted on 04/23/05 - 10:09 PM
Member Posts: 37 Comments: 0 Joined: 04/02/05	I have a question about these as well, I installed one new one (8" that fit like a glove , but a second (I believe 6" fits in the old hole but the recess does not line up. What type of tool do I need to widen the recess so the new plate will fit properly into the existing hole? Thanks Edited by seaduck on 02/23/06 - 6:20 PM
Joe Kriz	#5  Posted on 04/24/05 - 9:47 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	jbarrow and seaduck, I posted a new article last night with all the info and part numbers. I purchased mine directly through Beckson in the Khaki color. They made a special run recently had hopefully they stil have some left in that color. The 6" plates must be the "Thin Ring" version and the 8" have the Standard Ring. The article is posted on the left sidebar of this website or go here: http://whalercentral.com/readarticle....ticle_id=3
seaduck	#6  Posted on 04/25/05 - 7:10 PM
Member Posts: 37 Comments: 0 Joined: 04/02/05	THANKS JOE, Me and my deck both thank you, (thin ring huh?) buy the way where did you buy your deck plate? would beckson deal direct? or where you lucky enough to find a local shop that carried them. Thanks again P.S. I thought the new white plate 8"stuck out like a sore thumb I did not know they made different colors.
Joe Kriz	#7  Posted on 04/25/05 - 7:27 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	seaduck, I purchased the deck plates directly through Beckson. You can order through their site using this link: http://www.beckson.com/howtoorder.htmlorder.html Their main page is also here: http://www.beckson.com/ If all else fails, contact Matt Reed Edited by Joe Kriz on 04/25/05 - 8:19 PM
seaduck	#8  Posted on 04/25/05 - 8:29 PM
Member Posts: 37 Comments: 0 Joined: 04/02/05	OK Thank you
jbarrow4124	#9  Posted on 05/01/05 - 7:42 PM
Member Posts: 6 Comments: 0 Joined: 04/12/05	Joe, Thanks for the info. I have ordered new deck plates from Beckson. Hopefully they will arrive soon. Take care, Jack