|
Whaler Decals
|
| Paul Graham |
Posted on 07/24/09 - 7:24 PM
|
Member
Personal Page
Posts: 123
Comments:
0
Joined: 05/18/07
|
Can anyone tell the lay out for replacing the whaler decals on my 78 Montauk, thanks
|
| |
|
|
| Joe Kriz |
Posted on 07/24/09 - 7:33 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Paul,
Take a look some of the personal pages for the 1978 Montauk models or a few other years. That should give you an idea of placement.
I had the small decals on my 1978 Montauk.
Although you can't see much of mine in these photos.
http://users.sisqtel.net/jkriz/Montau...ntauk.html
Here is another,
http://users.sisqtel.net/blewis/Monta...ntauk.html
|
| |
|
|
| Guts |
Posted on 07/24/09 - 7:35 PM
|
Member
Personal Page
Posts: 612
Comments:
8
Joined: 11/21/08
|
I'm going to be doing that soon myself, I have the measurements written down but not at hand now, give me a day or two. Ok
|
| |
|
|
| Joe Kriz |
Posted on 07/24/09 - 7:39 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Guts,
It looks like you have the medium, 18 inch long decals.
The earlier models used the small, 14 inch decals.
http://www.whalercentral.com/photogal...hoto_id=48
|
| |
|
|
| Paul Graham |
Posted on 07/24/09 - 7:46 PM
|
Member
Personal Page
Posts: 123
Comments:
0
Joined: 05/18/07
|
Thanks to you both, I got the 28" black decals from Majic Brush. I guess I need to look at a year model that had that size decals
|
| |
|
|
| Joe Kriz |
Posted on 07/24/09 - 7:50 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
The earlier 17's used the small 14 inch decals up to about 1980.
Then the 17's changed to the medium sized 18 inch decals.
None of the 17's had larger decals than 18 inch.
You might ask Janis if she would exchange the decals unless you are set on putting on the 28 inch version.
|
| |
|
|
| Paul Graham |
Posted on 07/24/09 - 7:56 PM
|
Member
Personal Page
Posts: 123
Comments:
0
Joined: 05/18/07
|
On Custom15699's personal page looks like he has 28" decals, I think it looks good, may just stay with what I have
Edited by Paul Graham on 07/24/09 - 8:25 PM |
| |
|
|
| Guts |
Posted on 07/25/09 - 9:13 AM
|
Member
Personal Page
Posts: 612
Comments:
8
Joined: 11/21/08
|
Thanks Joe I didn't even think about the size difference.
|
| |
|
|
| Joe Kriz |
Posted on 07/25/09 - 10:57 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
I think I may have my sizes mixed up.
Guts,
What size are your decals?
I have 28 inch on my Outrage 18'....
Paul,
I think Custom15699 has the 28 inch which are correct for after about 1980 for the 17' and larger models.
http://www.whalercentral.com/infusion...er_id=8964
I don't have any of the smaller decals to measure at this time.
Can anyone tell me what the smaller sizes are on their Montauks before 1980 ?
Or even the 13' or 15' models...
Edited by Joe Kriz on 07/25/09 - 11:01 AM |
| |
|
|
| Guts |
Posted on 07/25/09 - 11:38 AM
|
Member
Personal Page
Posts: 612
Comments:
8
Joined: 11/21/08
|
mine are 28" but I not sure what goes on Paul Graham 78 Montauk I'm looking now for the paper with the measurements on it.
Edited by Guts on 07/25/09 - 11:40 AM |
| |
|
|
| Joe Kriz |
Posted on 07/25/09 - 11:57 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Guts,
Great...
I gave the wrong information above.
The earlier models were smaller. Not sure if 14" or 18"...
About 1980 they changed to the 28 inch long decals for the 17' models instead of the smaller ones.
These are measured from the front of the sled to the back of the sled.
|
| |
|
|
| Guts |
Posted on 07/25/09 - 12:21 PM
|
Member
Personal Page
Posts: 612
Comments:
8
Joined: 11/21/08
|
Joe I sent Paul Graham and you a email a pic of the 13¾ is the back of the sled to the back of the stern parallel with the under side of the lip of the gunnel. from the same point down useing a framming square to the bottom of the sled is 8½ + or -
|
| |
|
|
| Joe Kriz |
Posted on 07/25/09 - 12:49 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
I might write an article on this if I can get enough info.
1. Guts 1981 Montauk 17' with 28" decals.
8 1/2" down to bottom of sled from under the gunwale lip
13 3/4" from transom to back of sled
2. Joe Kriz 1985 Outrage 18' with 28" decals.
10" down to bottom of sled
10" from transom to back of sled
Anyone have something different?
Post it here.
Please make sure your decals have not been replaced by you or someone else in the past and possibly put them in the wrong location.
|
| |
|
|
| Paul Graham |
Posted on 07/25/09 - 2:46 PM
|
Member
Personal Page
Posts: 123
Comments:
0
Joined: 05/18/07
|
This is good news, I thank both of you for your help, I have had the decals for I while and couldn't remember, but I thought for sure I would have discussed this with Janice when ordering. Anyway, I will use your measurements, Guts, thanks again
|
| |
|
|
| Joe Kriz |
Posted on 08/02/09 - 4:14 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
No one else wants to take the time and measure their decals?
Length of decal?
Placement of decal?
|
| |
|
|
| Seafarer |
Posted on 08/02/09 - 6:47 PM
|
Member
Personal Page
Posts: 25
Comments:
0
Joined: 04/15/09
|
Joe Kriz wrote:
No one else wants to take the time and measure their decals?
Length of decal?
Placement of decal?
I'll measure tomorrow (1986 Montauk 17'
|
| |
|
|
| Guts |
Posted on 08/02/09 - 7:20 PM
|
Member
Personal Page
Posts: 612
Comments:
8
Joined: 11/21/08
|
I'll measure tomorrow (1986 Montauk 17'
How about making a personal page your self...
Edited by Phil T on 08/02/09 - 8:00 PM |
| |
|
|
| buckwheat |
Posted on 11/04/09 - 11:36 AM
|
Member
Posts: 19
Comments:
2
Joined: 07/10/08
|
What size of decal would I put on a 15 super sport?
|
| |
|
|
| whalerman |
Posted on 11/05/09 - 2:48 PM
|
Member
Posts: 540
Comments:
5
Joined: 06/26/07
|
Yes hi, mine on my '90 Outrage 19 are 28" long 10" down to the bottom of the "sled" and 7 1/2" fwd from the stern corner and in red, all original placings.
Edited by whalerman on 11/05/09 - 2:49 PM
THOM : 1999 Outrage 18, 2012 E-TEC 150, 2012 EZ Loader trailer |
| |
|
|
| MW |
Posted on 11/05/09 - 3:23 PM
|
Member
Personal Page
Posts: 1827
Comments:
10
Joined: 01/08/06
|
On my 1976 15' sport the Decal's are 14" long, they came from the B/W Dealer. My decal's were replaced by me, and previous ownership is unknown.
Hint: When I work with "Pressure sensative" (self-stick) Decals, I mix 1 teaspoon of "Dawn" dish detergent liquid into 1 gallon of cool water. Then I take that mixture and put it in a spray bottle. spray the "pre-cleaned" area that you want to apply the decals to heavily with the soap mixture, spray your finger tip's and hand's heavily as well with the soap mixture, peel off the backing of the decal, spray that down with the soap mix as well, NOW apply the decal to the area that you want. If you "Goof", or get it "Crooked", it's "NOT" Fatal. You can still slide the decal to the correct position, or straighten it out. when you get it right (should only take a minute, stand way back and look),leave it alone to dry over night (Hand's off), in the morning it's perfect and dry, and you look like a real "PRO" !
Matt |
| |
|
