1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Rod holder on splashwell
hamil791	#1  Posted on 06/28/09 - 9:22 PM
Member Posts: 17 Comments: 0 Joined: 11/12/06	I have a Montauk 170 and would like to add a three rod holder on to the splash well. As the splashwell wall is filled with foam I am looking for ideas as to the best way to give me a fairly strong mount. Thanks, Ian
nvaccaro	#2  Posted on 06/28/09 - 9:28 PM
Member Personal Page Posts: 209 Comments: 0 Joined: 08/22/07	I remember seeing a picture of a Montauk somewhere on the site and the owner had a rod holder mounted on the splashwell. Let me see if I can find that picture and get the member's name. Maybe you could message him for some advice. By the looks of his boat, he knows what he is doing. I'll be back.
nvaccaro	#3  Posted on 06/28/09 - 9:42 PM
Member Personal Page Posts: 209 Comments: 0 Joined: 08/22/07	I found the pic. Check out Bottomfish's personal page. Take a look at the last picture. He has a really nice looking '83 Montauk. Hope this helps.
Turpin	#4  Posted on 06/29/09 - 4:42 AM
Member Personal Page Project Albums Posts: 434 Comments: 20 Joined: 07/04/08	http://whalercentral.com/infusions/pe...r_id=12121 1963 13' Sport 50hp Evinrude Maintaining a level of sanity that is socially acceptable
Guts	#5  Posted on 06/29/09 - 6:27 AM
Member Personal Page Posts: 612 Comments: 8 Joined: 11/21/08	I have my fuel filter/water separator mounted in the splash well, use coarse thread with some kind of sealant to prevent water from getting in the foam.