Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I need to know what hardware to use for attaching the cushion to the z-legs. . and also the best hardware to use for mounting the zlegs to the boat. Any help is appreciated.
My plywood seat base was attached to the Z-legs using T-nuts. I could not find stainless T-nuts so I epoxied ordinary stainless nylock nuts into the ( new (I was making a new seat ) plywood. Drilled holes and then used a small chisel to make the 6 sides. Smeared with epoxy and hammered the nuts in. From the top, nylock side up. Attach using reg. machine screw or bolt from the bottom.
