1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

center console mounting screws
In2Deep	#1  Posted on 03/08/09 - 6:23 AM
Member Personal Page Posts: 177 Comments: 0 Joined: 08/14/08	Well my rewire is finally 95% complete and Im in the process of re-attaching my cc to the deck,I kept the screws in labeled jars,but didnt label each screw! Anyway, I have 4 screws for each side of the console,2X3" and 2X1.5". I cant figure out where the longeer 3" screws go? Any help would be appreciated. Thanks,Jerry
In2Deep	#2  Posted on 03/08/09 - 6:53 AM
Member Personal Page Posts: 177 Comments: 0 Joined: 08/14/08	just to clarify,Im talking aboutabout the screws at the bottom of each side of the console that thread first through the teak strip then through the console then into the teak block under the console
Phil T	#3  Posted on 03/08/09 - 7:05 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	I think the longer screws go into the console, short ones into the floor. Try, with one screw, with the console, if it bottoms out too soon, I am wrong. : ) 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
In2Deep	#4  Posted on 03/08/09 - 11:25 AM
Member Personal Page Posts: 177 Comments: 0 Joined: 08/14/08	I already did the trial method,the long ones bottomed out in all the holes in the side of the console? I mean I can get 4 more shorter (2 for each side) and secure the console to the deck that way,Im just not comfortable having 4 X 3" screws left over. They are too long to go down into the deck?? Baffeled?