1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Where to find long Stainless bolts...
Dogface	#1  Posted on 02/13/09 - 2:58 PM
Member Personal Page Posts: 80 Comments: 1 Joined: 07/30/08	I'm installing a pedestal seat mount on the front bulkhead of my Montauk 150. It takes six bolts. Two need to be 6"...no problem, but the remaining four need to be 6.5" and I can't seem to find anything over 6" in either flat head or panhead. Size I'm using is 5/16x18. You guys must have sources for such things...I've searched the web with no luck. Thanks in advance, Mark
Binkie	#2  Posted on 02/13/09 - 3:27 PM
Member Personal Page Posts: 2012 Comments: 0 Joined: 12/19/05	Here is one way--maybe-- I don`t know your layout. You can buy 5/16 stainless threaded rod I think 24 or 40 inc at Home Depot. Cut the length you need and use locknuts on both ends Rich
Jeff	#3  Posted on 02/13/09 - 4:19 PM
Member Posts: 1987 Comments: 34 Joined: 04/02/05	McMaster Carr or Grainger is going to be your best bet. I have never seen stainless threaded rod at any big box store around my house.
Dogface	#4  Posted on 02/13/09 - 5:02 PM
Member Personal Page Posts: 80 Comments: 1 Joined: 07/30/08	Thanks guys, I actually just ordered the stainless threaded rod from McMaster. I would not have though of that solution. Also got some Dremel cut off wheels from them at the same time. I have always liked that company. Mark