1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1991 Outrage 19 stern conduit
landonbyman	#1  Posted on 02/14/24 - 12:31 PM
Member Posts: 3 Comments: 0 Joined: 01/02/24	So I was drilling holes in the stern for a swim step a kicker mounting plate yesterday, and drilled through a metal flex conduit. It’s the upper left hole in the stern picture. Anyone have any idea where this run starts and stops? Also has anyone found information on what is in the stern of these boats? I’ve been pretty frustrated with the lack of info available and while I don’t have a current need for this conduit (I don’t even really know where it goes for that matter) I sure would have planned this differently if I knew it was there.
Phil T	#2  Posted on 02/15/24 - 2:16 PM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	Your photo did not post. Check the size/dimension and try again. Email it to me if you are not successful. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
landonbyman	#3  Posted on 02/15/24 - 5:41 PM
Member Posts: 3 Comments: 0 Joined: 01/02/24	Pic attempt #2 landonbyman attached the following image: [40.93Kb]
landonbyman	#4  Posted on 02/15/24 - 5:42 PM
Member Posts: 3 Comments: 0 Joined: 01/02/24	And 3 landonbyman attached the following image: [121.53Kb]
Phil T	#5  Posted on 02/16/24 - 3:33 PM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	That's a first for me. Never heard/seen that in my 20 years on the forums. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT