1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

RPS Seat Rod holder
csnowman	#1  Posted on 10/08/23 - 4:21 PM
Member Posts: 4 Comments: 0 Joined: 05/03/23	Hi: Looking for a rod holder that will fit on the RPS seat without repositioning the handle. Seems like one with a smaller flange is required. Any ideas are welcome as this is pretty much the last part needed on my 1967 16' redo... Thanks.
Joe Kriz	#2  Posted on 10/08/23 - 5:37 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	I used Lee's Flush Mount 90º Rod Holders and did not have to move my Grab Handles. https://www.whalercentral.com/photoga...oto_id=775 Not sure what RPS you have or are dealing with? There are other vendors that sell similar Rod Holders like the Flush Mount Lee's. Let us know what you find out as we are always interested. See the attachment photo below. Joe Kriz attached the following image: [184.48Kb]
csnowman	#3  Posted on 10/09/23 - 2:33 AM
Member Posts: 4 Comments: 0 Joined: 05/03/23	Hi there: Thanks for the reply. I will check that out. I think my grab handles are further our than your. Nice looking boat.