1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Rubber Cap for Montauk 170 transom rod holders
MontaukFL	#1  Posted on 10/02/23 - 7:16 AM
Member Posts: 2 Comments: 0 Joined: 10/02/23	I have a 2012 Montauk 170 w/the baitwell. There are two built in rod holders on each side of the baitwell. The rod holders have a rubber cap that covers up the rod holder when not being use. I'm not sure what purpose the caps serve, but I need to replace them on my boat. Anyone know where to get replacements? TIA. (Edit: changed to proper name of Montauk 170 for clarification 2002-2017. Please read Guideline number 2 at the top of this page.) Edited by Joe Kriz on 10/02/23 - 7:37 PM
Phil T	#2  Posted on 10/02/23 - 9:40 AM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	Check with either: Sue Lodel - Parts Manager - Boat House - (920) 793-2715 Justin/Derek - Nauset Marine - Parts - 508.255.0777 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
MontaukFL	#3  Posted on 10/02/23 - 10:05 AM
Member Posts: 2 Comments: 0 Joined: 10/02/23	Thanks Phil
melfa21	#4  Posted on 10/03/23 - 9:26 AM
Member Posts: 17 Comments: 0 Joined: 04/23/23	If they can't help you try Amazon. You'll need to know if they are vertical, or angled. https://www.amazon.com/s?k=Perko+rod+holder+caps&crid=3LQM940FI36GL&sprefix=perko+rod+holder+caps%2Caps%2C206&ref=nb_sb_noss_1 Edited by melfa21 on 10/03/23 - 9:27 AM 1998 Outrage 21 225 Yamaha Saltwater