1974 Montauk console switch question
|
BillTano |
Posted on 09/08/23 - 5:02 AM
|
Member
Posts: 29
Comments:
0
Joined: 09/02/15
|
Morning everyone,
I have been neatening up all the wires under my dash and replacing connections this summer. My question is does anyone know what the single pull switch to the right of the navigation switch on the console is supposed to work?
The switch on mine is not connected to anything.
Thanks in advance.
Billy
Edited by BillTano on 09/08/23 - 8:47 AM |
|
|
|
Joe Kriz |
Posted on 09/08/23 - 2:38 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Just a spare. Whatever you want to connect to it.
I believe there is an extra fuse right below the pull switch too.
Joe Kriz attached the following image:
[6.97Kb]
|
|
|
|
BillTano |
Posted on 09/10/23 - 9:24 AM
|
Member
Posts: 29
Comments:
0
Joined: 09/02/15
|
Thanks again for all your help!
|
|
|
|
BillTano |
Posted on 09/10/23 - 9:49 AM
|
Member
Posts: 29
Comments:
0
Joined: 09/02/15
|
While I’m neatening up the wires, I was going to put a waterproof junction box where the stern light harness connects to the light harness that comes from the rub rail through the gunnel.
I have seen pictures of one but can’t find a tan one to match the color of the boat.
Does anyone know where I can get one and if so the part number?
Thanks,
Bill
|
|
|
|
Joe Kriz |
Posted on 09/10/23 - 3:20 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Block, Terminal #12008500
Cover, Terminal Block #12557300
You can download the Part Manual for the Montauk 17' here in our "Download Section".
https://www.whalercentral.com/downloa...p?cat_id=3
|
|
|
|
Finnegan |
Posted on 09/11/23 - 1:05 PM
|
Member
Posts: 1926
Comments:
16
Joined: 05/02/08
|
For the nav light junction box on the inside of the hull, call Sue at Twin Cities Marine, Manitowoc WI (now merged with The Boathouse company). She sells a hull matching box that conceals a 4 gang terminal block (only 3 gangs are used). It only requires minor drilling for wire entry and exit.
I'll send a photo of mine to your Email address for your reference.
|
|
|
|
Phil T |
Posted on 09/12/23 - 3:18 PM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 6991
Comments:
6
Joined: 03/26/05
|
Joe - Listing the part # does not help with a vendor who sells it.
Nauset Marine sells the black version of the cover:
https://www.nausetmarine.com/boston-w...ker-cover/
Contact SSI Custom Plastics - 301-373-2372
Phil T attached the following image:
[143.59Kb]
Edited by Phil T on 09/12/23 - 3:25 PM
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|
|
Joe Kriz |
Posted on 09/12/23 - 4:33 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11434
Comments:
452
Joined: 03/18/05
|
Phil T wrote:
Joe - Listing the part # does not help with a vendor who sells it.
Never heard of that.
How would anyone know exactly what original part they are referring too?
I order parts from Sears with part numbers for items I purchased back in the 1960's. Many part numbers have been superseded but usually the part is exactly the same.
|
|
|