1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Boat cover support
renoduckman	#1  Posted on 03/08/23 - 2:56 PM
Member Posts: 81 Comments: 0 Joined: 08/12/05	I have a 1974 Montauk. Any suggestions for a good way to support the boat cover ? The previous owner moved the CC and seat forward. This makes more fishing room in the back, but more area for the cover to sag between the CC and transom Thanks Joe
Phil T	#2  Posted on 03/08/23 - 5:33 PM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	pole support. or 2x4 in the shape of a T. Use twine to keep in place. or Make a hoop or hoops out of 1/2" PVC pipe the curves up and down. Cut a notch in the ends so it sits on the edge of the gunnel or aft rail if installed. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT