1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Montauk 17 dash plate
drh146	#1  Posted on 12/12/22 - 10:17 AM
Member Personal Page Posts: 66 Comments: 0 Joined: 07/31/09	I'd like to get a stainless plate made to go under the steering wheel, and house gauges and switches. My boat is getting a new engine on, and I dont have it. Does someone have (or could someone take) the measurements of the whole rectangle and size and location of the mounting screwholes please? I would like the plate to replace the 2 black metals and 1 center vinyl one, as seen in the below picture from Phil's personal page. (Tried to attach) Thank you! Edited by drh146 on 12/15/22 - 11:00 AM
drh146	#2  Posted on 12/15/22 - 12:04 PM
Member Personal Page Posts: 66 Comments: 0 Joined: 07/31/09	OK, i found the drawing of the plates in the downloads section (Thanks Joe K). Now all I need to know is the distance between the plates, or the distance between the inner mounting holes.. Also does anyone see any reason 1 full plate, instead of 2 with vinyl between, wouldnt work? Thanks!
Phil T	#3  Posted on 12/15/22 - 12:18 PM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	One plate has been done by a handful of owners with success. I look at it as personal preference. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT