1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1989 25 Outrage adding twins
Showtime7	#1  Posted on 08/30/21 - 6:15 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Guys what size shafts would Yamaha f150’s need to be to hang on back of 1989 BW 25’ Outrage and what should the center be?
Phil T	#2  Posted on 08/30/21 - 7:51 AM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	Per Boston Whaler - Twin engines for the Outrage 25 should be 20" shafts and 29-3/4" apart. "The motors should be rigged with some toe-in with the spacing between the propeller hub centers 1/2" to 3/4" greater than the spacing between the leading edge of the gearcases. " -- Tom Clark Edited by Phil T on 08/30/21 - 7:58 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Joe Kriz	#3  Posted on 08/30/21 - 3:17 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Standard transom or Whaler Drive?
Phil T	#4  Posted on 08/30/21 - 3:29 PM
Administrator Personal Page Personal Album Project Albums Posts: 6991 Comments: 6 Joined: 03/26/05	Oh, good one Joe! That makes a difference. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Showtime7	#5  Posted on 08/31/21 - 4:29 PM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Standard transom….