1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1989 25' Outrage aftermarket center console
Showtime7	#1  Posted on 08/02/21 - 7:41 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Im getting ready to remoel a 1989' BW Outrage and the console is in rough shape. any suggestions on an after market CC. Thanks
Phil T	#2  Posted on 08/02/21 - 8:41 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	This is hard since you are outside the US. Many owners have rebuilt hacked up consoles by filling all the holes with wood blocks and glass/gelcoat. Have a photo of what you have? 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Showtime7	#3  Posted on 08/03/21 - 4:52 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Phil T, Im an American ands live on the East Coast of the good ole USA. Not sure why you think im out of the country. Ill try and attach some pictures. Thanks
Showtime7	#4  Posted on 08/03/21 - 5:17 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Boat pictures Photo 1 - Showtime7 attached the following image: [115.43Kb] Edited by Phil T on 08/03/21 - 8:57 AM
Phil T	#5  Posted on 08/03/21 - 8:18 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	Your profile shows Germany. See attached. Phil T attached the following image: [44.46Kb] 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Phil T	#6  Posted on 08/03/21 - 8:20 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	For adding photos - The photo needs to be 960x720 in pixel size or minimum of 640x480. The preferred size is 960x720. The photo needs to be 225 kb or less in file size. The name cannot contain any spaces or punctuation characters like comma, etc... The file name also needs to be .jpg format. Uppercase .JPG will not work. It must be lowercase .jpg Email me if you need assistance. Click on my profile to get contact info. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Showtime7	#7  Posted on 08/03/21 - 8:26 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Location should be fixed . Thank yoiu for all the support, K Photo 2 Showtime7 attached the following image: [69.33Kb] Edited by Phil T on 08/03/21 - 8:58 AM
Phil T	#8  Posted on 08/03/21 - 9:03 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	You have a Super Console. A factory option on the Outrage 18,20,22 and 25. The exterior appears to be well cared for with a prior owner doing a decent job replacing the wood side and rear doors with composite doors. As for the inside, it is the typical spagetti disaster one sees in almost every Outrage that has not had a professional re-wire. I've had 2 boats with interior consoles like that. The existing console is a great asset to your boat. Replacing it will diminish it esthetically and some of its value. I suggest you do some clean up of the wiring. While it looks horrible, it can be a DIY if you have basic skills. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Showtime7	#9  Posted on 08/03/21 - 3:24 PM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Phil, I’ll look for other examples of the super console that has been updated. Thanks again!
Joe Kriz	#10  Posted on 08/03/21 - 3:48 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	That is the newer Super Console from 1986 on and is very nice. https://www.whalercentral.com/article...icle_id=71 Your console doors have been changed from Teak to Starboard. I certainly would not change the console but that is your choice.
Showtime7	#11  Posted on 08/04/21 - 4:14 AM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Joe, thanks for your feedback. I’m going to redo the current console. Any ideas on how I could improve this one? Thanks again, kevin
Phil T	#12  Posted on 08/04/21 - 8:17 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	Many owners have updated their dash and switch panels, replaced the original switches with lighted and labelled Contura style. As for panels, you can refinish the ones you have now if you don't want to change the layout. A light sanding and some black stove paint will renew them. As for cleaning up the inside and the wiring, this is a good off-season project. I have done all three of my boats. A good source for wire, switches and panels is www.newwriemarine.com To provide advice, tell us what you want to change, improve, remove etc. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Showtime7	#13  Posted on 08/04/21 - 2:39 PM
Member Posts: 18 Comments: 0 Joined: 04/03/14	Phil, Awesome! I’m doing my homework and you guys are incredible. Thank you!