1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Newbie question - where do I see my fresh water level on 280 Vantage?
f1tifosi	#1  Posted on 07/02/21 - 3:43 AM
Member Posts: 1 Comments: 0 Joined: 07/02/21	Ridiculous question I know, but just bought my first Boat in 20 years and it is a 280 BW Vantage. Read the instruction book and cannot see where/what gauge I should be using and where to find information on my fresh water level. Is there a fresh water level indicator in my Raymarine? Thanks for the patience guys. Chris
CAR37	#2  Posted on 07/27/21 - 7:25 AM
Member Posts: 2 Comments: 1 Joined: 03/01/21	I to have a 2021 280 vantage. Good luck. It’s like finding the drain on fish box, with out using macerated pump
Phil T	#3  Posted on 07/27/21 - 9:25 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	I do not recall there is a gauge. The Owners manual, section 3.7 does not detail there is a gauge. Given your boat is new, ask your sales representative. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
butchdavis	#4  Posted on 07/28/21 - 7:36 AM
Member Posts: 828 Comments: 0 Joined: 11/22/11	If it is a poly tank and visually accessible a quick glance will reveal the level. Butch
Phil T	#5  Posted on 07/28/21 - 8:57 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	The tank is in the floor aft of the fuel tank. Phil T attached the following image: [121.55Kb] Edited by Phil T on 07/28/21 - 8:59 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT