Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Greetings all,
I’m going to be installing a transom mount transducer on my 1986 18’ Outrage. Anyone who had done this already and can share a picture of the transducer mounted on the transom? I’m interested in trying to get the location right the first time.
Secondary-I’m considering using a Stern Saver if anyone has experience with that product.
Any help/suggestions will be appreciated.
Mike
My personal page has a decent photo. I don't have one straight at the stern. I would say that wire that goes over the transom is approximately 6" from the closest part of the motor bracket. I hope this helps.
I have a picture of where mine will be first tested when I complete the refit and start water testing. I don't know how this placement will workout yet, but I suspect it will have to be moved closer to the F-115. The transducer is an Airmar CHIRP that will communicate with the new Garmin 741xs on the helm.