1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Layout Inside Console
dreilly	#1  Posted on 10/04/10 - 9:40 AM
Member Personal Page Posts: 130 Comments: 0 Joined: 09/14/09	I have an '86 Outrage 18 and have a couple of questions about the original console layout inside after the shop moved some things around: 1) There is a large plastic oval that mounts to the wooden floor inside of the console in the front right for the steering cables, etc. Does this mount stand tall inside of the console or does it face down (like a funnel) and penetrate the boat deck as well? I have a feeling mine was remounted upside down. It stands about 4" tall in the console. 2) Was there anything to protect the edges of the hole in the deck to the rigging tunnel or was it raw? Maybe the part mentioned above serves this purpose as well? I've looked at Phil T's project album (which was very helpful - thanks Phil) and was wondering if this is how the older Whalers were set up as well. Thanks, Don Edited by dreilly on 10/04/10 - 9:53 AM
Blackduck	#2  Posted on 10/04/10 - 11:09 AM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	The tall side goes up, I guess to keep things, like screws, from falling down the tunnel. I believe it has a molded in plastic trim ring. Edited by Blackduck on 10/04/10 - 11:24 AM Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha