1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

repair flaky nonskid
cjay	#1  Posted on 09/17/10 - 2:33 PM
Member Personal Page Posts: 8 Comments: 0 Joined: 09/01/10	Hello i am new. I just bought a 196X 13. I am planning my restore and have a question. There is flaking on the non skid. How should I resolve? I can sand the non-skid away then use an algrip paint non skid, but would rather stay original. Please advise. a link to the phone is below: http://www.jaytammy.com/nonskid.jpg [img]http://www.jaytammy.com/nonskid.jpg[/img]
cjay	#2  Posted on 09/20/10 - 7:42 AM
Member Personal Page Posts: 8 Comments: 0 Joined: 09/01/10	Did I not post enough information? Is the picture too hard to see?
Derwd24	#3  Posted on 09/20/10 - 8:40 AM
Member Posts: 1607 Comments: 9 Joined: 05/09/07	Did you see this thread below? If you want to keep it factory, watch the video in post #4 and give a read to the article in post #8. Removing and recreating the non-skid from scratch may be your only option: http://whalercentral.com/forum/viewth...;pid=68309 Dave - 1983 Outrage 22
Jeff	#4  Posted on 09/20/10 - 8:55 AM
Member Posts: 1987 Comments: 34 Joined: 04/02/05	I would recommend sanding it all the nonskid off and back to the glass and then refinishing the floor with an Alwgrip roll on nonskid. 1993 23' Walkaround Whaler Drive