1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Norman pin locations for 1970 13ft whaler?
matthew schoenste	#1  Posted on 09/03/10 - 8:46 AM
Member Posts: 3 Comments: 0 Joined: 07/26/09	Ive had a 1970 13ft whaler recently resored and the guy who taped and sprayed my boat quit and isnt able to be found for the location of the covered holes for the norman pins. i cant find anywhere on the net the exact location of the holes in the boat. anyone out there got the 1958-1970 model im pretty sure the locations are all the same? id realy appreciate it if somebody could measure for me. thnks.
Turpin	#2  Posted on 09/03/10 - 9:14 AM
Member Personal Page Project Albums Posts: 434 Comments: 20 Joined: 07/04/08	It will be hard to find the exact center without slight exploration. I'll have to measure the splash well locations. The front will be even tougher but I have a close up photo http://s355.photobucket.com/albums/r4...crack4.jpg There should be a slight recessed semi-circular area on the hump in where the pin was once located. If that recess is not there, I'm not sure how to guide you further. 1963 13' Sport 50hp Evinrude Maintaining a level of sanity that is socially acceptable
John M	#3  Posted on 09/03/10 - 4:03 PM
Member Personal Page Posts: 11 Comments: 0 Joined: 07/10/10	The center of the hole for the Norman pin is 7 inches from the side and 1 1/4 inches from the top of the splashwell. I just measured it on my 1960 13 ft. John Lewis 1960 13' Sport / 30 Evinrude