1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

What is this and where can i find one?
grahamh	#1  Posted on 09/02/10 - 5:39 PM
Member Posts: 60 Comments: 0 Joined: 05/28/10	My new (to me) Outrage is missing one of the stainless pieces of hardware inside the bow. It is square with two screws and a hole to mount something in the center. I assume they are used to mount a dodger?? where can i find a replacement? if someone can tell me how to post a photo I can do that too. thanks Graham
Joe Kriz	#2  Posted on 09/02/10 - 5:52 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Inside the bow is a large area. Or do you mean inside the bow locker? I have no idea. Have you looked through the OEM Part Photos section on the left sidebar to see if you can identify it?
Joe Kriz	#3  Posted on 09/02/10 - 5:56 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	After re-reading your post... So, there should be one of these pieces on each side and one is missing. A Mills Dodger uses 4 fitting that attaches on the side of the bow just above the steps. 2 on each side.
grahamh	#4  Posted on 09/03/10 - 3:04 AM
Member Posts: 60 Comments: 0 Joined: 05/28/10	Joe- Thanks for the response. Yes, I have looked thru the OEm parts area and did not see this piece of hardware. And yes, there should be 4 of them. So I assume they are for Mills covers. Should I contact Mills for a replacement? Anyone know how to attach a photo to a post? thanks Graham