1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1985 Montauk cover for floor tunnel?
Northern Exposure	#1  Posted on 08/18/10 - 6:39 AM
Member Personal Page Posts: 50 Comments: 1 Joined: 08/13/10	The tunnel where all the cables and wires exit at the rear near the motor has four holes (as if one at each corner) that would seem to be for a cover plate that would partially cover the opening. Anyone know a source for that cover? Were they wood or fiberglass on the 85 Montauk? Thanks everybody. Edited by Joe Kriz on 08/18/10 - 6:22 PM
Barryg	#2  Posted on 08/18/10 - 7:45 AM
Member Personal Page Posts: 242 Comments: 1 Joined: 04/01/08	NE , my Montauk is missing the "Sump Cover" as well. I found drawings in the download section on the left side of your screen.Go to parts drawings. I have seen them made from wood and starboard. BG Edited by Barryg on 08/18/10 - 7:46 AM
Northern Exposure	#3  Posted on 08/18/10 - 7:57 AM
Member Personal Page Posts: 50 Comments: 1 Joined: 08/13/10	Thank you. I just found that drawing also. Maybe I will try to make one. Cheers
bmw90w	#4  Posted on 08/18/10 - 8:36 AM
Member Personal Page Posts: 328 Comments: 1 Joined: 09/08/09	I made mine out of starboard and it works well. Make sure to leave enough room to get to the plug! 1984 Montauk
OGuidry	#5  Posted on 08/18/10 - 9:12 AM
Member Posts: 16 Comments: 0 Joined: 07/22/08	I put screws in the four holes to keep the water out of the core and left the cover off.