Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I have a 80 model 15 footer and am in the process of repairing. I really could you some advice on the best way to make these repairs and modifications.
What is the best and easiest way to fill screw holes in the bed and sidewalls from 1/8" to 7/16"? the holes do not penetrate the exterior except around motor mount. The holes where console was mounted seem to need more than just sealing as they are deeper and need filling first. I went to West Marine and they were not sure what type of fill to use.
the other item is type of console should I use. I saw a couple of 15's on this site that had duel consoles and was wondering if this this was available as a replacement. Thanks for any help Sparky57
For a structural repair to screw holes, I swear by West Systems Six10 thickened epoxy in a caulk-type tube. It's not cheap, and you have to use it all or buy spare mixing tubes, but you can INJECT the material into the hole where it will fill the void behind the fiberglass. It is sandable within a few hours.