1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Replacing Rub Rail
GatorK	#1  Posted on 08/07/10 - 2:39 PM
Member Posts: 3 Comments: 0 Joined: 03/14/10	Where can i find info on replacing rub rail? I am restoring a 15 and i did not pay attention to the wire under the rail!! was it put thru a drilled hole and run under the blacl bumper or was it under the whit harder rail? Thoughts, Kevin Ft Walton Florida. Gatork@ymail.com
Joe Kriz	#2  Posted on 08/07/10 - 2:48 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Is the wire still there? The white piece will need a hole for the wire and then the wire runs forward to the light. Then the black rub rail insert covers the wire.
GatorK	#3  Posted on 08/07/10 - 2:50 PM
Member Posts: 3 Comments: 0 Joined: 03/14/10	Joe, thanks for the info. Im getting close to the finish line!!
GatorK	#4  Posted on 08/07/10 - 2:54 PM
Member Posts: 3 Comments: 0 Joined: 03/14/10	as for the bow light! do i place over the new rub rail or cut rail ans install closer to hull?
Joe Kriz	#5  Posted on 08/07/10 - 3:06 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	I don't think the rub rail has any cuts in it on the 15' models but I don't know for sure as I have never owned one. Maybe other 15' owners can be more specific.