1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Any 22 Outrage Whaler Drive owners?
fin11	#1  Posted on 06/14/10 - 9:30 AM
Member Posts: 7 Comments: 0 Joined: 06/14/10	Hey all, new to the forum and owner of a 91 22' Outrage WD. Have a question for any of you who may have the same model and could help with a hydraulic steering question. Does anyone know how long the steering hose for a Seastar hydraulic system would have to be for this year/model? Thanks for your input Fin
Tom W Clark	#2  Posted on 06/14/10 - 10:21 AM
Member Personal Page Posts: 4280 Comments: 7 Joined: 09/30/05	Hose length will depend on whether you have one motor or two and whether you have one cylinder or two as well as if you have a Standard Console or a Super Console. The factory used 22' hoses for the Standard Console models with single cylinder.
fin11	#3  Posted on 06/14/10 - 11:34 AM
Member Posts: 7 Comments: 0 Joined: 06/14/10	Thank you Tom for your input, It is the standard console, re-powered with a single 2007 250hp Etec. Im curious about the extra 2 feet the whaler drive appendage adds and if this would require a 24' hose or if the 22' would still be the appropriate length? Thanks again Fin
Tom W Clark	#4  Posted on 06/14/10 - 11:47 AM
Member Personal Page Posts: 4280 Comments: 7 Joined: 09/30/05	22' foot hoses is what was used on the 1991 Outrage 22 Whaler Drive model.