Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I hAve a 16' cohassett that I need to connect to a hoist. To get in the water at port orford or. I plan to
make 3 straps , two connecting on stearn bolts and eyes. And one connecting to the anchor connection. I have a 600 lb motor, and 250 lb of scuba gear.
The guys at the dock say I should get rid of the stock cast boston whaler bolts and eyes replace with steel .
So I'm wondering if any one has done this . Is the anchor bolt strong enough to lift loaded boat? Along with the two rear bolt and eyes.
I thought they would have straps on hoist to go under boat. That is not the cAse, every one needs to have there own straps.
Thanks for any input. Jr