Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Ignition switch wire schematics

Posted by Tom Summers on 03/08/17 - 2:48 PM
#1

I need to replace the ignition/key switch in my newly acquired 1994 Rage 14. Is there a source for wire schematics or diagrams with wire color codes for these boats. Thank you for any help.

Posted by Joe Kriz on 03/08/17 - 4:53 PM
#2

Welcome aboard WhalerCentral.
We have lots of information for you here at WhalerCentral in our Articles section.

I am guessing that your boat has the older style Red Plug engine wiring harness.
http://www.whalercentral.com/images/a...arness.jpg

Or, if it has been updated in the past, then the newer style.
http://www.whalercentral.com/images/a...Colors.jpg

See this article for more info:
http://www.whalercentral.com/articles...icle_id=72

Also see this Frequently Asked Question in our Main menu section on the Navigation bar at the top of the page.
http://www.whalercentral.com/faq.php?...p?cat_id=8

Hopefully that will get you started.

Maybe another member here with a Rage model can help answer any other questions you may have.

Posted by Tom Summers on 03/09/17 - 3:33 PM
#3

This is great! Thank you for the quick response, it looks like I have the "red" harness. Its supposed to be snowing and 20 degrees this week end so I will have to see what next week looks like. Thanks again, I am sure there will be more questions later as I start working on my Rage.