1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1977 13' Whaler - Capacity Decal Location
Marlinmate	#1  Posted on 11/24/20 - 2:16 PM
Member Personal Page Posts: 14 Comments: 0 Joined: 05/13/14	Hey there....my restoration is starting to show progress. The paint is done. Awlgrip Snow White on the exterior Awlgrip Whaler Blue on the interior I need to purchase replacement decals for the capacity plates. Is there an exact place they need to go? Any measurements from top of rail or transom etc?? Also need the exterior logo decal and the measurements are posted on this site. Marlinmate attached the following image: [129.35Kb] Edited by Marlinmate on 11/24/20 - 2:34 PM
Marlinmate	#2  Posted on 11/24/20 - 2:36 PM
Member Personal Page Posts: 14 Comments: 0 Joined: 05/13/14	Here is the capacity info. Trying to find out where this goes in the boat. Any specific measurements? Marlinmate attached the following image: [26.22Kb]
Phil T	#3  Posted on 11/24/20 - 5:09 PM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	I recall the sticker is on the starboard side, on the gunnel wall between the console and bench seat, but not blocked by the side mounted throttle. All non-current graphics and labels can be purchased from Janis at Magic Brush. www.magicbrushsign.com She is the sole factory authorized vendor and has the correct color and fonts/designs. Don't get your turned by the pathetic imitations. We can spot the fakes a mile away. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
MG56	#4  Posted on 11/25/20 - 4:17 AM
Member Personal Page Posts: 355 Comments: 0 Joined: 05/11/13	From the outside back corner, starbrd side, 83" to center. 3/4" don to top
biggiefl	#5  Posted on 11/25/20 - 10:42 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	Mine is where Phil said but being a 1981 it is barely readable. i have never had a cop look at it on any boat. Decals like said are from Janis. I went with large decals from a 22' on my 13' but she can make them OEM or any size you want. I also did a 1/4" pinstripe under the rubrail like the outrages have. I did Navy logos and red pinstripe with a little harpoon at the bow. Edited by biggiefl on 11/25/20 - 10:45 AM 24 Whalers so far....