---

The pic is from a guy who has an original super sport. If anything has been changed I do not know. But there is an indentations at the bottom where the screw would go which would indicate this might have been the intended purpose. None of the other vertical railings have the opposing holes with indentations and the bottom stanchion would not be able to slide inside the down tube because of the indentations. If you look where the vertical tube ends, according to the wood plan, there would be no wood to anchor a stanchion into. The wood should be where the screw is going into. It is not my purpose to confuse anyone but to properly install the railing and to help anyone else who might encounter the same problem.