---

In the process of cleaning up transom well of my 13' sport. Former owner had several battery box strap brackets screwed to deck using plastic drywall plugs to anchor. Dremmel tool makes quick work of cleaning material out of hole. Resulting round hole of 1/4" D and 1/4" deep. The location is close to the transom wall so the area can have water.

The boat as been stored inside all winter and has never been left in the water longer than 8 hours last summer. That was only about 6 times the complete season.

First issue: Before cleaning the holes for patching I power washed the deck with the trailer lifted high at the bow and the transom plug open. Not the best idea but its done. Now a small amout of water is rising in the holes. Will evaporation allow this to dry out and if so how long will this take in 40F to 60F temps? Have used a heat gun and compressed air accross the top of holes.

Second issue: When it is dry what is best compound for filling?