Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: trouble sourcing brass drain tubes for 83 Outrage 18

Posted by In2Deep on 02/23/09 - 11:29 AM

Ive read the articles /posts on how to perform this,but Im having trouble locating the brass tubing and o-rings. I treied the McMaster site with the part#'s but it didnt work? Anyone else know where I could get the stuff? Thanks.

Posted by Joe Kriz on 02/23/09 - 11:49 AM

In2Deep wrote:
Ive read the articles /posts on how to perform this,but Im having trouble locating the brass tubing and o-rings. I treied the McMaster site with the part#'s but it didnt work? Anyone else know where I could get the stuff? Thanks.

Can you be more descriptive on "but it didn't work?

What didn't work?
You tried to find the parts on their site but that didn't work?
You tried to order the parts from them but that didn't work?

Posted by Joe Kriz on 02/23/09 - 12:04 PM

I did a search on McMaster Carr.

Apparently the 8950K791 is the same as 8950K792 for the 1 inch O.D. brass tubing.

Posted by In2Deep on 02/23/09 - 12:24 PM

Hey Joe,I put the part# 890K791 in and couldnt find? Ill try the new one. The part I have for the O-ring is 9557K483,is this correct?
Thanks again. Jerry

Posted by Joe Kriz on 02/23/09 - 12:32 PM

Jerry,

NO.... that is NOT correct for the O-Rings

Here are the numbers from the article:
O-Rings for 1 inch tubes are part # 9557K118
O-Rings for 1 1/4 inch tubes are part # 9557K64

Edited by Joe Kriz on 02/23/09 - 12:34 PM

Posted by In2Deep on 02/23/09 - 1:20 PM

muchas gracias.