Posted by Phil T on 02/05/23 - 1:03 PM
#2
The engine needs to be mounted so the anti-cav plate is 2" above the bottom of the keel. Typically this is "3 holes up", top bolt in the 4th hole counting down from the top.
The F300 has a WOT rpm of 6000.
Note raising the engine will increase RPM by ~125rpm for each hole raised due to less drag.
This is good because the engine is too low.
Once you raise the engine, re-test and report back.
Edited by Phil T on 02/05/23 - 1:05 PM