Posted by Phil T on 09/21/21 - 5:59 AM
#2
The spiral hose in the bottom left of the photo is from the bilge pump. which needs to be rotated so it is sitting on the floor of the bilge. The end of the hose should connect to a through hull fitting on the inside sidewall of the boat. Look on the outside of the boat, near the Whaler logo for a through hull fitting. It is not the floor drain, rather 4-5 inches above the waterline. That is the fitting, just attach the hose with stainless clamps to the inside of the fitting.
Edited by Phil T on 09/21/21 - 6:00 AM