---

There are splashwell drains in the transom.

There is a sump drain under an access panel in the aft starboard corner of the floor forward of the bulkhead. This drain goes down to the bottom of the boat.

All plugs go in from inside the boat.

For appropriate rails, contact CMI in Massachussetts. They are the original vendor.

https://cmimarineproducts.com/marine/om/marine/

You should read up on how Boston Whalers are made so you can understand how it is different it is from all other boats.

There is backing plywood under the fiberglass in strategic locations for the screws that the console, seats, rails etc.

Every fastener should have a dab of marine sealant in the hole, under the head, to keep water from entering the foamed areas.