---

Thanks Phil,I am running the Laser 2 until i make a move on another prop.You are right about the prop performing well other than WOT.The cruise on the Laser seems like it could be improved- rpm is too high for the speed it feels like.I will try adj on the trim some more next time im out. I have 28% slip @4200.I have 4% @6070. Going up and down some small swells in the bay the rpms roll up and down enough to raise an eyebrow.I have owned quite a few boats over the years and do not recall rpm changes like that on such small swells.Maybe im not on plane all the way?
The cavitation plate is 1 1/2'' above the keel.Level,neutral trim. I used a long strait edge along the bottom of the keel too measure against-.From what i have read here and elsewhere that is where you want to be.I will have to look at it closely while the boat is under way when i get out with someone.It was spraying a bit until it was raised one hole.The dealer was against raising it from lowest holes and installed it bottom hole.My guess is they are concerned with overheating. That could happen if you are not careful with that adjustment