---

I use a generic boat cover salvaged off another hull. I also have a hard top I installed and I cinch the cover to the trailer after it goes over the cabin. Does not include the bow. I did have to cut plywood that sits on top of the gunnels. Several 16" wide pieces forming an upper "roof". A couple of 2x4's under the plywood supported by he seats and transom. I tried the plywood by itself but the water pockets/weight cracked one of the pieces. A very hokie set up but the boat sits at a "north 40" portion of my yard. The trouble with covering is the sag of the cover over the deck without support.