Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Cover for 22' Revenge w/arch top

Posted by CrabLeg on 03/27/17 - 7:13 PM
#1

Hi - I was wondering if anyone knew of where to find a storage cover for a 22' Revenge with a custom arch top (or some other solution). It currently just has a canvas over the cabin, but I'm storing it in my driveway under a few trees that will drop sap and pollen on it throughout the summer, so I wanted to try and prevent this. Let me know, thanks!

Edited by CrabLeg on 03/27/17 - 7:19 PM

Posted by Reel Easy on 03/28/17 - 6:34 AM
#2

If all you are doing is protecting from the elements, consider buying a "plastic' tarp from Harbor Freight and use zip ties to secure the tarp to the trailer frame. It is not pretty but it will work for not much cash. I am pretty sure they carry tarps large enough for your boat. Consider securing 2x4s from the deck railing to the CC and from the CC to the motor for drainage.

Posted by gchuba on 03/28/17 - 7:38 AM
#3

I use a generic boat cover salvaged off another hull. I also have a hard top I installed and I cinch the cover to the trailer after it goes over the cabin. Does not include the bow. I did have to cut plywood that sits on top of the gunnels. Several 16" wide pieces forming an upper "roof". A couple of 2x4's under the plywood supported by he seats and transom. I tried the plywood by itself but the water pockets/weight cracked one of the pieces. A very hokie set up but the boat sits at a "north 40" portion of my yard. The trouble with covering is the sag of the cover over the deck without support.