Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Fiberglass Bow Hatch 1989 Montauk 17'
Posted by scottmcx on 10/21/16 - 5:19 AM
#1
The hinge points of the hatch have failed. I'd like to get a replacement but can't find. Anyone have a source?
(changed abbreviated year to full 4 digit year per guideline #1 at the top of this page)
Edited by Joe Kriz on 10/21/16 - 11:14 AM
Posted by Phil T on 10/21/16 - 5:43 AM
#2
There are no sources for fiberglass covers.
The are techniques to repair your hatch. Can you post photos so we can provide appropriate advice?
Posted by scottmcx on 10/21/16 - 6:27 AM
#3
Excuse the dirt...Hurricane debris. I have not remove it and one side is still hanging on. If you need me to remove I can
Edited by scottmcx on 10/21/16 - 6:57 AM
Posted by Phil T on 10/21/16 - 12:22 PM
#4
The cover has a wood perimeter and layers of fiberglass/gelcoat on top and bottom.
One could dig out the rotted wood, scarf in a piece with epoxy and drill new holes.
Posted by Weatherly on 10/22/16 - 8:21 AM
#5
The focus of the repair should be on installing the correct hinges. The hinges in your photograph are outrage hinges. You need to obtain and install a pair of Montauk locker hinges. Look at the parts photograph index for further reference. This is a common failure point. The Montauk locker hinges alllow for a nut, bolt, washer fastening through the hatch cover at 3 points, making for a more secure fastening of the hinge.
Edited by Weatherly on 10/25/16 - 7:27 AM