Posted by Charles Ciaccio on 09/24/16 - 1:10 PM
#1
i just purchased a 1992 17' Montauk.
Hull in good shape but needs extreme detailing - what is best approach and products i should use?
also, misssing right link to bow rail-can just one portion be purchased?
finally, trying to figure out all of the connectors on the console-is there a photo which identifies the various
parts?
best way to get copy of an owner's manual?
thanks
Posted by Joe Kriz on 09/24/16 - 3:56 PM
#2
Congratulations on your purchase and welcome to WhalerCentral.
Take a look at our Site Map link in the menu bar at the top of this page.
This link shows just about everything we have.
Scroll down to "Downloads" and look under "Owners Manuals".
Every Whaler may have different equipment and thus be wired differently.
Let us know what your are looking at wiring or connecting.
Here is a basic Montauk panel that comes from the factory. Some changes through the years.
http://www.whalercentral.com/photogal...oto_id=834
Whalers did not come with motors from the factory back then so that was left up to the dealer or buyer to install the motor.
http://www.whalercentral.com/articles...icle_id=17
What brand, size, and year of motor do you have?