Posted by mtown on 09/09/16 - 5:58 AM
#23
tahoewhaler wrote:
Hi,
I was reading about this on another forum where one contributor said that blowing air in could cause delamination. I was going to rig a compressor with fittings to strategic places and a couple of holes in the bottom stern to let the moisture out, but now I'm not sure it is a good idea...
You may be referring to a post I made. I was using a fine tip and an air compressor and inserting the tip into old screw holes to blow random water out. I was not attempting to dry foam. I did separate the foam from the inner deck, but was able to reattach it by drilling some holes and injecting epoxy.