Posted by heimtun on 08/02/16 - 1:54 PM
#1
I'm getting ready to reinstall (some of) the front platform with its integrated "sliding" convertible seat.
Two questions:
- what holds the seat in its upright position? I see no latches or anything from keeping it from slipping back down. Am I missing something?
- which side/end of the seat/platform goes astern to act like a backrest? I'm guessing the short side/end since the long one has a upright edge that I'm assuming holds cushions from sliding off.
TIA for input and/photos
Wayne
Posted by Balcho77 on 08/06/16 - 1:53 PM
#2
Not sure on your questions but I just picked up a 1968 and was trying to find info on the platform and seat as well. Did you find on here?
Posted by heimtun on 08/06/16 - 1:59 PM
#3
My platform and seat came with the boat... it was not installed though.
Posted by Joe Kriz on 08/06/16 - 2:29 PM
#4
I think the platform area just folds in half.
The back of the seat is the forward console.
See if this personal page helps.
http://www.whalercentral.com/infusion...r_id=11506
The drawings for the platform are in our Downloads section for those that want to build their own forward platform.