Posted by MG56 on 06/27/16 - 1:17 PM
#8
ClawFishing wrote:
I completely restored the boat over two years so new mounting holes were drilled in the transom by the mechanic. Mounting template for the new holes and then engine holes done based on the lower end unit location to the bottom of the hull. I want more time on the water before thinking about changing my engine height.
So this conversation will be hard for anyone but you & your mechanic to follow. If it is at all possible compare how your engine is mounted to the standard mounting>>>
http://www.whalercentral.com/articles...icle_id=82
We know your boat but don't know how far down you top holes are drilled nor how many holes up your engine is mounted.