---

Ok replaced plugs, stator, power pack cleaned and tested coils, starts up like brand new! Now I have a new problem, she won't turn off with the key! I've replaced the kill switch and ignition switch. She will only turn off by pulling lanyard for kill switch. I had a 3 wire kill switch before 2 black with yellow stripe and a single black ground, and now can only find a 2 wire, 2 black with yellow stripes. My research told me 2 hook 1 black/yellow to the M on ignition switch and the other goes to the engine....won't shut off, so I found another diagram has black yellow from engine to M on ignition switch and from there to kill switch and the other kill switch wire to the ignition ground, same thing wont shut off with key. Can anyone shed some light on going from 3 wires to 2