Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 2000 18' Outrage - Stern table
Posted by MLFOutrage180 on 04/25/16 - 2:05 PM
#1
I'm looking for a table top with rod holders that will fit on my 2000 outrage stern rail. Any ideas where you can find one to buy?
Posted by MLFOutrage180 on 04/25/16 - 3:52 PM
#3
I was hoping something that you can attach to the rail fitting that is right in front of the engine. I believe people put eyelets for tubing or watersking
Posted by MLFOutrage180 on 04/25/16 - 4:06 PM
#5
Yes that's exactly the one. Link doesn't work though. Is there another website I can find Sue at?
Posted by MLFOutrage180 on 04/25/16 - 4:11 PM
#6
Got it, emailed them. Thanks!!
Posted by porthole2 on 04/26/16 - 10:48 AM
#7
That "fishing station" table is option 100-70206
The folding table is 100-70305
And the ski pylon is 100-70327
And if still available, no doubt they will be real proud of the price!
Posted by porthole2 on 04/26/16 - 10:52 AM
#8
I think the base to that table is 1035047
Same base for both tables
Edited by porthole2 on 04/26/16 - 1:01 PM
Posted by NautiWhaler on 04/27/16 - 6:13 AM
#9
Can you let me know what the price is from Sue when you get it? Thanks.
Posted by MLFOutrage180 on 04/27/16 - 1:49 PM
#11
Thanks for the response Joe! Thats exactly what I'm looking for. I'll let you know if I am able to track one down. I dont necessarily want to cut bait on the table, one that folds for entertaining may be a better option. I do like the rocket launcher style with the rod holders though
Posted by KR on 06/24/16 - 7:41 PM
#12
I think I have the table your looking for. Have you found one yet.
Kevin
Posted by Bobho on 09/25/16 - 9:46 AM
#13
Looking for that exact same fishing table for my
1996 Outrage. If anyone has one or knows where I can get one please feel free to contact me in profile. (removed email per guideline #4 at the top of this page)
Thanks!
Edited by Joe Kriz on 09/25/16 - 11:53 AM
Posted by Wesleygday on 09/29/21 - 6:18 AM
#14
Hello,
Has any one had any luck locating this stern table recently? I would take either option. If anyone can point me in the right direction I would greatly appreciate it!
Thank you,
Wes
Posted by Phil T on 09/29/21 - 8:11 AM
#15
If not available, which, based on the age of this thread, I think it is, I would have one made.
Take the photo posted by Joe above and have it fabricated.
Ray Martin of
www.martinmarinedesign.com can do it.
Posted by Wesleygday on 09/30/21 - 5:40 AM
#16
Thank you Phil. I appreciate your quick reply to my question. I am relatively new to Boston Whaler, I previously had an Eastern 18’ cc. Do you have any suggestions for the best place to go for replacement parts or accessories? I was thinking it would be easier to find parts because it is a Whaler, but then again the boat is 20+ yrs old. We are also wanting to install a bow dodger on for some dry coverage and a place for the kids to get out of the sun. Do you recommend Mills canvas or a different source?
Thank you,
Wes
Posted by Phil T on 09/30/21 - 6:32 AM
#17
If it is a Whaler specific part, there are two well respected dealers that run serious parts departments.
Sue - Beacon- Twin Cities Marine
www.beacontcm.com
Justin - Nauset Marine
www.nausetmarine.com
Both ship all over the country and abroad.
Most fittings can be found on on-line retailers. The list is too long to share.
As for a bow dodger, it has not been a popular feature. Whaler only offered it as a canvas option on just a few models.
For your boat, you will want to go to a local shop and have them make you a dodger. While Mills is a great source, they are a bit on the expensive side.
I would guestimate a dodger with stainless bows and Sunbrella fabric would run $2000-$2500.
Posted by Wesleygday on 10/02/21 - 3:34 AM
#18
Thank you Phil for thorough reply. I can tell this forum is going to be a great resource for me!
-Wes